平田研究室

A1(RJ1) 平田好洋, 加藤昭夫,“噴霧熱分解法によるβ型アルミナ粉体の合成”, 日本化学会誌, 1979 (10), 1309-1315 (1979).

A2(RJ2) 平田好洋, 加藤昭夫,“噴霧熱分解法β"－アルミナ粉体の焼結性”, 日本化学会誌, 1980 (11), 1703-1712 (1980).

A3(CR1) 加藤昭夫, 平田好洋,“噴霧熱分解法による複合酸化物微粉体の合成とその焼結特性に関する研究－β"－アルミナ粉体の焼結性”, 旭硝子工業技術奨励会研究報告, 36, 231-244 (1980).

A4(CR2) 加藤昭夫, 平田好洋,“噴霧熱分解法による複合酸化物微粉体の合成とその焼結特性に関する研究II－β"－アルミナ粉体の焼結性と焼結体の電導性”, 旭硝子工業技術奨励会研究報告, 39, 245-256 (1981).

A5(RJ3) 平田好洋, 前田達郎, 加藤昭夫, “噴霧熱分解法によって得られたβ"-アルミナ焼結体の微構造と電導性”, 日本化学会誌, 1981 (10), 1595-1603 (1981).

A6(CP1) A. Kato, Y. Hirata, Y. Tokunaga, T. Maeda and H. Nishi, "Sintering Behavior of β"-Alumina Powders Prepared by Spray-pyrolysis Technique", in "Ceramic Powders, Materials Science Monographs, 16", Elsevier Scientific Publishing Company, 1983, Edited by P. Vincenzini, pp. 835-841.

A7(RJ4) 加藤昭夫, 新田浩一, 平田好洋, “噴霧熱分解法で合成したカルシア安定化ジルコニア粉体の焼結性”, 日本化学会誌, 1983 (10), 1544-1546 (1983).

A8(RJ5) 徳永幸男, 西　晴久, 平田好洋, 加藤昭夫, “β, β"－アルミナ焼結体の微細構造及び導電性におよぼす成形・焼結法の効果”, 日本化学会誌, 1983 (12), 1720-1727 (1983).

A9(CR3) 平田好洋, “噴霧熱分解法を用いるβ型アルミナ粉体の合成と焼結性に関する研究”, 鹿児島大学工学部紀要, No. 20, 73-130 (1984).

A10(CR4) A. Kato and Y. Hirata, "Sintering Behavior of β-Type Alumina Powders Prepared by Spray-pyrolysis Technique and Electrical Conductivity of Sintred Body", The Memoirs of the Faculty of Engineering, Kyusyu University. 45, No. 4, 251-271 (1985).

A11(RJ6) Y. Hirata, H. Kitasako and K. Shimada, "Electrical Conductivity of the System Na_1+3xZr₂(P_1-xGe_xO₄)₃", Journal of the Ceramic Society of Japan, 96 (5), 620-623 (1988).

A12(RJ7) Y. Hirata, S-Y. Lee, K. Shimada and Y. Ishihara, "Characterization and Sintering of MgO-Doped β-Alumina Powders Prepared by the Hydrolysis of Metal Alkoxides", Journal of the Ceramic Society of Japan, 98 (7), 630-638 (1990).

A13(RJ8) Y. Hirata, T. Izaiku and Y. Ishihara, "Synthesis of Dense β, β"-Alumina Ceramics by Reaction Sintering of Na2O-containing Alumina Compact", Journal of Materials Research, 6 (3), 585-591 (1991).

A14(RP1) Y. Hirata, T. Izaiku and Y. Ishihara, "β, β"-Alumina Ceramics by Reaction Sintering of Na₂O-MgO-Al₂O₃", in "Ceramic Transactions, Vol. 22, Ceramic Powder Science IV", The American Ceramic Society, Westerville, Ohio, 1992, Edited by S. Hirano, G. L. Messing and H. Hausner, pp. 521-526.

A15(RJ9) Y. Hirata, S. Lee, K. Shimada and Y. Ishihara, "Electrical Properties of MgO-Doped β-Alumina Ceramics Prepared from the Metal Alkoxides", Journal of the Ceramic Society of Japan, 100 (7), 877-881 (1992).

A16(RJ10) Y. Hirata, H. Shinya and T. Izaiku, "Annealing Effects on Electrical Properties of Reaction-sintered β+β"-Alumina Ceramics", Materials Letters, 15 (4), 274-280 (1992).

A17(RJ11) Y. Hirata and T. Izaiku, "Fabrication of Dense β, β"-Alumina Ceramics by Reaction Sintering", Journal of the Ceramic Society of Japan, 101 (3), 268-272 (1993).

A18(RP2) Y. Hirata and H. Shinya, "Synthesis and Electrical Properties of β, β"- Alumina by Reaction Sintering", in Proceedings of the 12th International Conference on Thermoelectrics, Institute of Electrical Engineers of Japan, 1994, Edited by K. Matsuura, pp. 218-222.

A19(CP2) H. Ono, K. Higashi, K Sonoda, S. Sameshim and Y. Hirata, "Sinterability and Electrical Conductivity of Yttria-Doped Ceria", in Proceedings of the 6th Tohwa University International Symposium, Frontier Nanostructured Ceramics, 1996, pp. 159-164.

A20(RP3) S. Sameshima, H. Ono, K. Sonoda, K. Higashi and Y. Hirata, "Powder Preparation and Sintering of Rare Earth-Doped Ceria", in Proceedings of the 2nd International Meeting of Pacific Rim Ceramic Societies, Symposium 20, 1999, pp. 2-7.

A21(RJ12) N. Sakai, K. Yamaji, T. Horita, H. Yokokawa, Y. Hirata, S. Sameshima, Y. Nigara and J. Mizusaki, "Determination of Hydrogen Solubility in Oxide Ceramics by Using SIMS Analyses", Solid State Ionics, 125 (1-2), 325-331 (1999).

A22(RP4) K. Higashi, K. Sonoda, H. Ono, S. Sameshima and Y. Hirata, "Characterization of Rare Earth-Doped Ceria Powder Derived from Oxalate Coprecipitate", in "Key Engineering Materials. Vol. 159-160, Proceedings of International Symposium on Novel Synthesis and Processing of Ceramics", Trans Tech Publications, Switzerland, 1999, Edited by H. Suzuki, K. Komeya and K. Uematsu, pp. 25-30.

A23(RP5) K. Sonoda, K. Higashi, H. Ono, S. Sameshima and Y. Hirata, "Surface Properties and Aqueous Processing of Rare Earth-Doped Ceria Powders by Coprecipitation Method", in Key Engineering Materials Vol. 159-160, Proceedings of International Symposium on Novel Synthesis and Processing of Ceramics, Trans Tech Publications, Switzerland, 1999, Edited by H. Suzuki, K. Komeya and K. Uematsu, pp. 169-174.

A24(RJ13) K. Higashi, K. Sonoda, H. Ono, S. Sameshima and Y. Hirata, "Synthesis and Sintering of Rare Earth-doped Ceria Powder by Oxalate Coprecipitation Method", Journal of Materials Research, 14 (3), 957-967 (1999).

A25(RP6) Y. Hirata, H. Ono, K. Higashi, K. Sonoda, S. Sameshima and Y. Ikuma, "Microstructure and Electrical Conductivity of Rare Earth－doped Ceria", in "Ceramic Transactions, Vol. 92, Electrochemistry of Glass and Ceramics", The American Ceramic Society, Westerville, Ohio, 1999, Edited by S. K. Sundaram, D. F. Bickford and E. J. Hornyak Jr., pp. 137-148.

A26(RP7) S. Sameshima, K. Higashi and Y. Hirata, "Sintering and Grain Growth of Rare Earth－doped Ceria Particles", in Proceedings of the 3rd International Nano Ceramic Forum and the 2nd International Symposium on Intermaterials, 1999, pp. 163-16

A27(RJ14) S. Sameshima, T. Ichikawa, M. Kawaminami and Y. Hirata, "Thermal and　Mechanical Properties of Rare Earth－doped Ceria Ceramics", Materials Chemistry & Physics, 61, 31-35 (1999).

A28(RJ15) S. Sameshima, H. Ono, K. Higashi, K. Sonoda and Y. Hirata, "Microstructure of Rare Earth - doped Ceria Prepared by Oxalate Coprecipitation Method", Journal of the Ceramic Society of Japan, 108 (11), 985-988 (2000).

A29(RJ16) S. Sameshima, H. Ono, K. Higashi, K. Sonoda, Y. Hirata and Y. Ikuma, "Electrical Conductivity and Diffusion of Oxygen Ions in Rare Earth-doped Ceria", Journal of the Ceramic Society of Japan, 108 (12), 1060-1066 (2000).

A30(RJ17) M. Kamiya, E. Shimada, Y. Ikuma, M. Komatsu, H. Haneda, S. Sameshima and Y. Hirata, "Oxygen Self - diffusion in Cerium Oxide with Nd", Journal of Materials Reseach, 16 (1), 179-184 (2001).

A31(RJ18) S. Sameshima, K. Higashi and Y. Hirata, "Sintering and Grain Growth of Rare Earch - doped Ceria Particles", Journal of Ceramic Processing Research, 1 (1), 27-33 (2000).

A32(RJ19) S. Uchida, S. Sameshima and Y. Hirata, "Processing of Y - doped Ceria Film by Doctor Blade Method", Journal of the Ceramic Society of Japan, 109 (2), 100-105, (2001).

A33(IRP1) Y. Hirata, "Processing and Electrical Conductivity of Rare-Earth-Doped Ceria", in Proceedings of the 17th Korea-Japan International Ceramics Seminar, 2000, pp. 8-12.

A34(RJ20) S. Sameshima, H. Wakita and Y. Hirata, "Oxygen Partial Pressure Dependence of Electrical Conductivity of Rare-Earth-Doped Ceria Ceramics", Journal of Ceramic Processing Research, 2 (2), 83-86 (2001).

A35(RJ21) H. Fukudome, S. Sameshima and Y. Hirata, "Processing and Characterization of Anode Material for Solid Oxide Fuel Cell", Journal of Ceramic Processing Research, 2 (4), 160-164 (2001).

A36(RP8) H. Fukudome, S. Sameshima and Y. Hirata, "Microstructure and Electrical Properties of the Rare-Earth-Doped Ceria-Nickel System", in Proceedings of the 18th Japan-Korea International Ceramics Seminar, 2001, pp. 23-27.

A37(RP9) Y. Okawa, T. Matsumoto, T. Doi and Y. Hirata, "Preparation of NiO and Sm-doped Ceria Powders from Oxalate Precursors", in Proceedings of the 18th Japan-Korea International Ceramics Seminar, 2001, pp. 28-32.

A38(CP3) S. Sameshima, M. Kawaminami and Y. Hirata, "Thermal Expansion of Rare-Earth-Doped Ceria Ceramics", in Proceedings of the 4th Seminar on Core University Program (CUP) between Japan and Korea, 2001, pp. 103-106.

A39(RJ22) S. Sameshima, M. Kawaminami and Y. Hirata, "Thermal Expansion of Rare-Earth-Doped Ceria Ceramics", Journal of the Ceramic Society of

Japan

, 110(7), 597-600 (2002).

A40(RJ23) Y. Okawa, T. Matsumoto, T. Doi and Y. Hirata, "Thermal Stability of Nanometer-sized NiO and Sm-doped Ceria Powders", Journal of Materials Research, 17(9), 2266-2274 (2002).

A41(RP10) K. Koushio, S. Uchida, S. Sameshima and Y. Hirata, "Forming of Solid Electrolyte Films by Transfer Printing Method", in Proceedings of the 19th Korea-Japan International Seminar on Ceramics, 2002, pp. 587-591.

A42(RP11) Y. Ehira, S. Sameshima and Y. Hirata, "Transport Number of Oxide Ions in Sm-Doped Ceria Ceramics", in Proceedings of the 19th Korea-Japan International Seminar on Ceramics, 2002, pp. 26-30.

A43(RJ24) K. Higashinakagawa, S. Sameshima and Y. Hirata, "Preparation, Microstructures and Electrical Properties of the Ni/Sm-Doped Ceria Cermet as Anode Material of Solid Oxide Fuel Cell", Journal of Ceramic Processing Research, 5(1), 84-88 (2004).

A44(RJ25) Y. Okawa and Y. Hirata, "Sinterability, Microstructures and Electrical Properties of Ni/Sm-Doped Ceria Cermet Processed with Nanometer-Sized Particles", Journal of the European Ceramic Society, 25(4), 473-480 (2005).

A45(RJ26) T. Shimonosono, Y. Hirata, Y. Ehira, S. Sameshima and T. Horita, "Electronic Conductivity Measurement of Gd- and Sm-Doped Ceria Ceramics by Hebb-Wagner Method", Journal of the Ceramic Society of

Japan

, 112(5), Supplement Edition, S616-S621 (2004).

A46(RJ27) T. Shimonosono, Y. Hirata, Y. Ehira, S. Sameshima, T. Horita and H. Yokokawa, "Electronic Conductivity Measurement of Sm- and La-Doped Ceria Ceramics by Hebb-Wagner Method", Solid State Ionics, 174, 27-33 (2004).

A47(RJ28) Y. Yoshimura, Y. Hirata, S. Sameshima, H. Sueyoshi, T. Doi and T. Horita, "Sintering Behavior of Large Size, Sm-doped Ceria Solid Electrolyte Disk", Journal of Ceramic Processing Research, 5(4), 327-330 (2004).

A48(RJ29) S. Sameshima, Y. Hirata and Y.Ehira, "Thermal Stability of Rare-earth-doped Ceria under a Low Oxygen Partical Pressure”, Journal of Alloys and Compounds, 408-412, 628-631 (2006).

A49(RP12) T. Shimonosono, Y. Hirata, S. Sameshima and T. Horita, "Electronic Conductivity Measuremant of La-doped Ceria Ceramics by Hebb-Wagner Method", in Proceedings of the 21st Korea-Japan International Seminar on Ceramics, Gwangju, Korea, 2004, pp. 579-582.

A50(RJ30) T. Shimonosono, Y. Hirata, S. Sameshima and T. Horita, "Electronic Conductivity of La-doped Ceramics ", Journal of the American Ceramic Society, 88(8), 2114-2120 (2005).

A51(RJ31) Y. Hirata, S. Yokomine, S. Sameshima, T. Shimonosono, S. Kishi and H. Fukudome, “Electrochemical Properties of Solid Oxide Fuel Cell with Sm-Doped Ceria Electrolyte and Cermet Electrodes”, Journal of the Ceramic Society of Japan, 113(9), 597-604 (2005).

A52(RP13) Y. Hirata, T. Tokumaru and S. Sameshima, “Influence of Water Content in Fuel on Electric Power of Solid Oxide Fuel Cell”, Proceedings of the 22nd International Japan-Korea Seminar on Ceramics, Nagoya, 2005, pp.151-154.

A53(RP14) S. Yokomine, Y. Hirata, S. Sameshima, S. Kishi and H. Fukudome, “Electrochemical Properties of Solid Oxide Fuel Cell with Sm-Doped Ceroia Electrolyte and Cermet Electrodes”, Proceedings of the 22nd International Japan-Korea Seminar on Ceramics, Nagoya, 2005, pp.155-158.

A54(RP15) Y. Tsuneto, Y. Hirata and S. Sameshima, “Processing of Sm-Doped Electrolyte Film by Doctor Blade Method”, Proceedings of the 22nd International Japan-Korea Seminar on Ceramics, Nagoya, 2005, pp.379-382.

A55(RP16) S. Sameshima, Y. Hirata and K. Higashinakagawa, “Thermal Expansion of Nickel/ Samarium-doped Ceria Cermet”, Proceedings of 6th Pacific Rim Conference on Cernamic an Glass Technology-PacRim 6 (CDR), The American Ceramic Society, 2005, 9 pages.

A56(RJ32) Y. Yoshimura, Y. Hirata, S. Sameshima, H. Sueyoshi, T. Doi and T. Horita, “Electrochemical Properties of Solid Oxide Fuel Cell with Sm-Doped Ceria Eletrolyte and Sr-Doped Samarium Cobaltite Cathode, Advances in Technology of Materials and Materials Processing Journal, 9 (2), 25-28 (2007).

A57(PR17) Y. Hirata, S. Sameshima and G. Hiramatsu, “Dominant Factors Controlling Electric Power of Solid Oxide Fuel Cell with Rare Earth-Doped Ceria Electrolyte”, Proceedings of The 23^rd International Korea-Japan Seminar on Ceramics, Onyang Hot Spring Hotel, Asan, Korea, 2006, pp.93-96.

A58(RP18) T.　Shimonosono, X.H.　Wang, G.　Hiramatsu, Y.　Hirata, S.　Sameshima, N.　Matsunaga, T.　Doi and T.　Horita, “Oxygen Partial Pressure Dependence of Electrical Conductivity of La0.6Sr0.4Co0.2Fe0.8O3-δ”, Proceedings of the 23^rd International Korea-Japan Seminar on Ceramics, Onyang Hot Spring Hotel, Asan, Korea, Nobember 2—24, 2006, pp.467-470.

A59(RJ33) G.　Hiramatsu, Y.　Hirata, S.　Sameshima and N.　Matsunaga, “Electrochemical Properties of Perovskite Cathode for Solid Oxide Fuel Cell”, Materials Science Forum, 544-545, 985-988 (2007).

A60(RJ34) M.　Nagamori, Y.　Hirata, and S.　Sameshima, “Influence of Hydrogen Sulfide in Fuel on Electric Power of Solid Oxide Fuel Cell”, Materials Science Forum, 544-545, 997-1000 (2007).

A61(RP19) H.　Oshige, Y.　Hirata and S.　Sameshima, “Electrochemical Properties of Solid Oxide Fuel Cell Using Biogas”, Advanced Ceramic Processing International, Vol.3, No.1, 2006, pp.1-4.

A62(RJ35) T. Shimonosono, X.H. Wang, G. Hiramatsu, Y. Hirata, S. Sameshima, N. Matsunaga, T. Doi and T. Horita,”Electrochemical Properties of Cathode for Solid Oxide Fuel Cell”, Key Engineering Materials, 352, 255-258 (2007)

A63(RJ36) T. Shimonosono, G. Hiramatsu, Y. Hirata, S. Sameshima, N. Matsunaga, T. Doi, T. Horita, “Electrochemical Properties of Cathode for Solid Oxide Fuel Cell with Gd-Doped Ceria Electrolyte”, Advanced Materials Research, 26-28, 275-278 (2007).

A64(RP20) T. Miwa, Y. Hirata, S. Sameshima, N. Matsunaga, “Development of Anode Materials Using Stainless Steel for Solid Oxide Fuel Cell”, Proceedings of the 24th International Japan-Korea Seminar on Ceramics, 2007, pp.651-654.

A65(RJ37) A. Hara, Y. Hirata, S. Sameshima, N. Matsunaga and T. Horita, “Grain Size Dependence of Electrical Properties of Gd-doped Ceria”, Journal of the Ceramic Society of Japan, 116(2), 291-297(2008).

A66(RJ38) K. Matsumoto, Y. Hirata, S. Sameshima and N. Matsunaga, “Thermal Decomposition of Ammonia over Nickel/Gadolinium-doped Ceria Cermet”, Journal of the Ceramic Society of Japan, 16(3), 486-490(2008)

A67(RJ39) S. Sameshima, Y. Hirata, J. Sato and N. Matsunaga, “Synthesis of Hydrogen and Carbon Monoxide from Methane and Carbon Dioxide”, Journal of the Ceramic Society of Japan, 116(3), 374-379(2008)

A68(RJ40) Y. Hirata and A. Hara, “Conduction Model of Oxide Ions at Grain Boundary of Solid Electrolyte”, Ceramics International, 35(2), 887-896 (2009).

A69(RJ41) M.　Nagamori, T.　Shimonosono, S.　Sameshima, Y.　Hirata, N.　Matsunaga, Y.　Sakka, “Densification and Cell Performance of Gadolinium-Doped Ceria (GDC) Electrolyte/ NiO-GDC Anode Laminates”, Journal of the American Ceramic Society, 92(S1), S117-S121　(2009).

A70(RJ42) D.　Moriyama, Y.　Hirata, S.　Sameshima, N.　Matsunaga, T.　Doi, N.　Kashima and S.　Nagano, “Synthesis and Electrical Conductivity of La_0.6Sr_0.4Ru_0.9Mg_0.1O_3-δ Perovskite Solid Solution”, Journal of the Ceramic Society of Japan, 117(5), 635-638 (2009).

A71 (RJ43) Y.　Hirata, Y.　Terasawa, N.　Matsunaga, S.　Sameshima, “Development of Electrochemical Cell with Layered Composite of the Gd-Doped Ceria/ Electronic Conductor System for Generation of H2-CO Fuel through Oxidation-Reduction of CH₄-CO₂ Mixed Gases”, Ceramics International, 35, 2023-2028 (2009).

A72(RJ44) S.Matayoshi, Y.Hirata, S.Sameshima, N.Matsunaga and Y.Terasawa, “Electrochemical Reforming of CH₄-CO₂ Gas Using Porous Gd-doped Ceria Electrolyte with Ni and Ru Electrodes”, Journal of the Ceramic Society of Japan, 117(11), 1147-1152(2009).

A73(RJ45) Y.Hirata, K.Matsumoto, S.Sameshima, N.Matsunaga, M.Nagamori and T.Shimonosono, “Cell Performance of Strontium Ruthenium Oxide Cathode/ Gd-Doped Ceria (GDC) Electrolyte/ Nickel-GDC Anode System”, Journal of the Ceramic Society of Japan, 117(11), 1141-1146(2009).

A74(RJ46) T.Shimonosono, Y.Sakka and Y.Hirata, “Electrical Conductivity of Gd-Doped Ceria with Nano-sized Grain”, Transactions of the Materials Research Society of Japan, 34(3), 555-559(2009).

A75(RJ47) S.Sameshima, D.Moriyama, Y.Hirata and N.Matsunaga, “Synthesis and Electrical Conductivity of La_0.6Sr_0.4Ru_1-xMg_xO_3-delta (x=0-0.6) Perovskite Solid Solutions”, Materials Chemistry and Physics, 125, 191-195(2010).

A76(RJ48) Y.Ibusuki, H.Kunigo, Y.Hirata, S.Sameshima and N.Matsunaga,”Processing and Performance of Solid Oxide Fuel Cell with Gd-doped Ceria Electrolyte”, Journal of the European Ceramic Society, 31, 2663-2669(2011).

A77(RJ49) K.Shiratani, Y.Hirata, S.Sameshima, N.Matsunaga and S.Nakahara,”Synthesis and Electrical Conductivity of La-Sr-X-Mg-O (X=Ti, Zr, Al) Perovskite Solid Solution” Ceramics International, 37, 1525-1531(2011).

A78(CP4) A.Shinomiya, Y.Hirata, S.Sameshima and N.Matsunaga,” Synthesis and Electrical Conductivity of La_1-xSr_xAl_0.9Mg_0.1O_3-delta (x=0.1-0.4) Perovskite Solid Solution” , IOP Conference Series: Materials Science and Engineering, 18, 132015 (2011).

A79(RJ50) M.Ando, Y.Hirata, S.Sameshima and N.Matsunaga, “Electrochemical Reforming of CH₄-CO₂ Mixed Gas Using Porous Yttria-stabilized Zirconia Cell”, Journal of the Ceramic Society of Japan, 119(11), 794-800 (2011).

A80(RJ51) Y.Hirata, N.Matsunaga and S.Sameshima, “Reforming of Biogas Using Electrochemical Cell”, Journal of the Ceramic Society of Japan, 119(11), 763-769(2011).

A81(RJ52) Y.Hirata, M.Ando, N.Matsunaga, and S.Sameshima, “Electrochemical Decomposition of CO₂ and CO gases Using Porous Yttria-stabilized Zirconia Cell”, Ceramics International, 38, 6377-6387’2012).

A82(RJ53) Y.Suga, R.Yoshinaga, N.Matsunaga, Y.Hirata, and S.Sameshima, “Electrochemical Reforming of CH₄-CO₂ Mixed Gas Using Gd-doped Ceria Porous Electrolyte with Cu Electrode”, Ceramics International, 38, 6713 - 6721(2012).

A83(RJ54) Y.Ibuski, Y.Hirata, S,Sameshima, N.Matsunaga, “Influence of Composition of Gd-doped Ceria Electorlyte on Performance of Solid Oxide Fuel Cell”, Materials Science Forum, 724 ,389-392 (2012).

A84(RJ55) R.Oitate, Y.Hirata, S.Sameshima, N.Matsunaga, “Preparation and Electrical Conductivity of Sr(Zr_1-xAl_x)O_3-x/2 Perovskite Solid Solution (x = 0-0.5)”, Materials Science Forum, 761, 19-22 (2013)

A85(RJ56) N.Furukawa, Y.Hirata, S.Sameshima, N.Matsunaga, “Evaluation of Electric Power of SOFC Using Reformed Biogas”, Materials Science Forum, 761, 11-14 (2013).

A86(RJ57) S.Sameshima, N.Furukawa, Y.Hirata,T.Shimonosono, “Cell Performance of SOFC Using CH₄-CO₂ Mixed Gases”, Ceramics International, 40, 6279-6283 (2014).

A87(RJ58) Y.Hirata, Y.Kisanuki, S.Sameshima, T.Shimonosono,“Formation of Hydrogen by Electrochemical Reaction of CO Gas and H₂O Vapor Using Porous Gd-Doped Ceria Electrolyte”, Ceramics International, 40, 10153-10157(2014).

A88(RJ59) N.Furukawa, S.Sameshima, Y.Hirata, T.Shimonosono, "Influence of Cathode on Electric Power of Solid Oxide Fuel Cells”, Journal of the Ceramic Society of Japan, 122(3), 226-229(2014).

A89(RJ60) Y.Hirata, A.Shinomiya, I.Mukai, S.Sameshima, T.Shimonosono, N.Matsunaga, "Synthesisi and Electrical Conductivity of (La_1-xSr_x)(Al_1-yMg_y)O_3-delta Perovskite Solution, Journal of Asian Ceramic Societies, 2, 176-184(2014).

A90(RJ61) T.Shimonosono, M.Ueno, Y.Hirata, S.Sameshima, "Decomposition of Carbon Monoxide and Carbon Dioxide Using Cathode-supported Dense Yttria-stabilized Zirconia Electrolyte Cell”, Ceramics International, 40, 15957-15964 (2014).

A91(RJ62) K.Ueda, Y.Hirata, S.Sameshima, T.Shimonosono, K.Yamaji, “Formation of Hydrogen from the CO-H₂O System Using Porous Gd-doped Ceria Electrochemical Cell with MnO Cathode and Fe₃O₄ Aonode, Journal of Asian Ceramic Societies, 3, 82-87 (2015).

A92(RP21) Y.Hirata, S.Sameshima, T.Shimonosono,“Electrochemical Devices with Oxide Ion Electrolytes for Formation of Hydrogen and Decomposition of Carbon Dioxide from the CH₄-CO₂ Mixed Biogas”, Ceramic Transactions, Vol. 257, Ceramics for Environmental Systems, The American Ceramic Society, 2016, Edited by L.Wang, N.Imanaka, W.M.Kriven, M.Fukushima, G.Kole, pp.59-67.

A93(RJ62) Y.Hirata, S.Dio, A.Kai, T.Shimonosono, R.Yano, S.Sameshima, K.Yamaji, “ Performance of Yttria-stabilized Zirconia Fuel Cell Using H₂-CO₂ Gas System and CO-O₂ Gas System”, Ceramics International, 42, 18373-18379 (2016).

A94(RJ63) Y.Hirata, T.Shimonosono, K.Ueda, S.Sameshima, K.Yamaji, “Hydrogen Formation from a Real Biogas Using Electrochemical Cell with Gadolinium-doped Ceria Porous Electrolyte”, Ceramics International, 43, 3639-3646 (2017).

B1(RJ1) 平田好洋, 南園広志, 島田欣二,“金属アルコキシドから得られるSiO₂-Al₂O₃粉体の性質”, 窯業協会誌, 93 (1), 36-44 (1985).

B2(RJ2) 平田好洋, 南園広志, 島田欣二,“金属アルコキシドからのSiO₂-Al₂O₃粉体の焼結性”, 窯業協会誌, 93 (8), 475-478 (1985).

B3(RJ3) Y. Hirata, K. Sakeda, Y. Matsushita and K. Shimada, "Preparation of Fine SiO₂-Al₂O₃ Powders by Hydrolysis of Mixed Alkoxides", Journal of the Ceramic Society of

Japan

, 93 (9), 577-580 (1985).

B4(IRP1) S. Hori, Y. Shigaki, Y. Hirata, M. Yoshimura and S. Somiya, "Characterization and Processing of CVD Powders for Fabrication of Composite and Compound Ceramics", in "Processing Science of Advenced Ceramics, Materials Research Society Symposium Proceedings Volume 155", Materials Research Society, 1989, Edited by I. A. Aksay, G. L. McVay and D. R. Ulrich, pp. 3-12.

B5(RJ4) Y. Hirata, K. Sakeda, Y. Matsushita, K. Shimada and Y. Ishihara, "Characterization and Sintering Behavior of Alkoxides-Derived Aluminosilicate Powders", Journal of the American Ceramic Society, 72 (6), 995-1002 (1989).

B6(RJ5) 勝木宏昭, 平田好洋, “針状ムライトによるアルミナシートの被覆”, 日本セラミックス協会学術論文誌, 98 (10), 1114-1119 (1990).

B7(RJ6) Y. Hirata and M. Matsuda, "Electromotive Force Measurement of Mullite Ceramics As Oxygen Solid Electrolyte", Journal of the Ceramic Society of

Japan

, 101 (2), 233-236 (1993).

B8(RJ7) Y. Hirata, M. Kawabata and Y. Ishihara, "Electrical Properties of Silica-Alumina Ceramics in Nitrogen Atmosphere", Journal of Materials Research, 8 (5), 1116-1121 (1993).

B9(RJ8) 勝木宏昭, 一ノ瀬弘道, 白石敦則, 高木弘義, 平田好洋,“アルミナ/ムライト積層構造体の作製と破壊挙動”, 日本セラミックス協会学術論文誌, 101 (9), 1068-1070 (1993).

B10(RJ9) Y. Hirata and M. Matsuda, "Composition Dependence of Electromotive Force of Silica-Alumina Ceramics as Oxygen Solid Electrolyte", Journal of the Ceramic Society of

Japan

, 102 (3), 241-246 (1994).

B11(CP1) S. Sameshima, T. Ando and Y. Hirata, "Synthesis of Mullite / Zircon Composite through Reaction Sintering of Kaolinite and Zirconia", in Proceedings of the 6th Tohwa University International Symposium, Frontier Nanostructured Ceramics, 1996, pp. 153-158.

B12(CR1) 鮫島宗一郎, 平田好洋, “カオリナイト／ジルコニアの反応焼結”, 鹿児島県資源開発協議会調査研究報告, No. 34-1, 16-22 (1997).

B13(RP1) S. Sameshima, M. Ishizuka, Y. Yoshida and Y. Hirata, "Reaction between Kaolinite and Ziroconia", in Proceedings of the 6th International Symposium on Ceramic Materials & Components for Engines, 1998, Edited by K. Niihara, S. Hirano, S. Kanzaki, K. Komeya and K. Morinaga, pp. 446-451.

B14(RP2) Y. Hirata, T. Matsura, and M. Shibuya, "Reaction between Mullite and Polytitanocarbosilane", in "Key Engineering Materials Vol. 159-160, Proceedings of International Symposium on Novel Synthesis and Processing of Ceramics", Trans Tech Publications, Switzerland, 1999, Edited by H. Suzuki, K. Komeya and K. Uematsu, pp. 417-422

B15(RJ10) Y. Hirata, A. Yoshitomi and S. Sameshima, "Reaction, Microstructures and Mechanical Properties of Model Ceramic Ware in the K₂O-Al₂O₃-SiO₂ System", Journal of the Ceramic Society of

Japan

, 111(8), 560-566 (2003).

B16(RJ11) S.Itoh, Y.Hiata, T.Shimonosono, S.Sameshima, “Theoretical and Experimental Analyses of Thermal Conductivity of the Alumina-Mullite System”, Journal of the European Ceramic Society, 35, 605-612(2015).

B17(RJ12) Y.Hiata, S.Itoh, T.Shimonosono, S.Sameshima, “Theoretical and Experimental Analyses of Young's Modulus and Thermal Expansion Coefficient of the Alumina-Mullite System”, Ceramics International, 42, 17067-17073 (2016).

C. コロイドプロセスによるセラミックスの合成と構造制御（ 134 編）

C1(CP1) Y. Hirata and I. A. Aksay, "Colloidal Consolidation and Sintering Behavior of CVD-Processed Mullite Powders", in "Ceramic Microstructures '86, Role of Interfaces, Materials Science Research Volume 21", Plenum Press, 1987, Edited by J. A. Pask and A. G. Evans, pp. 611-621.

C2(IP1) Y. Hirata and I. A. Aksay, "Particle Segregation during Colloidal Filtration", in Proceedings of the International Workshop for Advanced Materials Technology, Ceramics IV, Nagoya, Japan Fine Ceramic Center, 1988, pp. 3-15.

C3(IRP1) Y. Hirata, S. Matsushita, S. Nakagama, I. Haraguchi, N. Hamada, Y. Ishihara and S. Hori, "Dispersion and Consolidation of the Colloidal Suspension in the Al₂O₃ Powder-Si₃N₄Whisker System", in "Processing Science of Advenced Ceramics, Materials Research Society Symposium Proceedings Volume 155", Materials Research Society, 1989, Edited by I. A. Aksay, G. L. McVay and D. R. Ulrich, pp. 343-352.

C4(RJ1) Y. Hirata, S. Matsushita, S. Nakagama, Y. Ishihara and S. Hori, "Rheological Properties and Consolidation of the Suspension in the Alumina Powder-Silicon Nitride Whisker System", Journal of the Ceramic Society of

Japan

, 97 (9), 881-887 (1989).

C5(IP2) Y. Hirata, S. Nakagama and Y. Ishihara, "Rheology of Silicon Nitride Whisker Suspension and Structure of Consolidated Whisker Compact", in Proceedings of the International Symposium on Fine Ceramics Arita '89, Saga, Saga Prefectural Government, 1989, pp. 194-195.

C6(RJ2) Y. Hirata, I. A. Aksay and R. Kikuchi, "Quantitative Analysis of Hierarchical Pores in Powder Compact", Journal of the Ceramic Society of Japan, 98 (2), 126-135 (1990).

C7(RJ3) Y. Hirata, S. Nakagama and Y. Ishihara, "Dispersion and Consolidation of Silicon Nitride Whisker in Aqueous Suspension”, Journal of Materials Research, 5 (3), 640-646 (1990).

C8(RJ4) Y. Hirata, S. Nakagama and Y. Ishihara, "Calculation of Interaction Energy and Phase Diagram for Colloidal Systems", Journal of the Ceramic Society of

Japan

, 98 (4), 316-321 (1990).

C9(RP1) Y. Hirata, I. A. Aksay, R. Kurita, S. Hori and H. Kaji, "Processing of Mullite with Powders Processed by Chemical Vapor Deposition", in "Ceramic Transactions Vol. 6, Mullite and Mullite Matrix Composites", The American Ceramic Society, Westerville, Ohio 1990, Edited by S. Somiya, R. F. Davis and J. A. Pask, pp. 323-338.

C10(RJ5) Y. Hirata, I. Haraguchi and Y. Ishihara, "Rheology and Consolidation of Colloidal Suspension of Ultrafine SiO₂-Al₂O₃ Powder", Journal of the Ceramic Society of

Japan

, 98 (9), 951-956 (1990).

C11(RJ6) Y. Hirata, A. Nishimoto and Y. Ishihara, "Forming of Alumina Powder by Electrophoretic Deposition", Journal of the Ceramic Society of

Japan

, 99 (2), 108-113 (1991).

C12(IP3) 平田好洋, 上柿元順子, 西本昭彦, 石原義巳,“アルミナ表面とポリアクリル酸の相互作用”, 化学工学シンポジウムシリ－ズ28,“機能性表面の解析と設計”, 化学工学会, 227-234 (1991).

C13(RJ7) Y. Hirata, S. Matsushita, Y. Ishihara and H. Katsuki, "Colloidal Processing and Mechanical Properties of Whisker Reinforced Mullite Matrix Composites", Journal of the American Ceramic Society, 74 (10), 2438-2442 (1991).

C14(CP2) Y. Hirata, K. Takeshima and Y. Ishihara, "Colloidal Processing of Whisker Reinforced Mullite Matrix Composites", in Proceedings of the 1st International Symposium on the Science of Engineering Ceramics, the Ceramic Society of Japan, 1991, Edited by S. Kimura and K. Niihara, pp. 321-326.

C15(IP4) Y. Hirata, "Science and Technology of Colloidal Processing", in Proceedings of International Symposium on Fine Ceramics Arita '91, Saga Prefectural Government, 1991, pp. 31-46.

C16(RJ8) Y. Hirata, J. Kamikakimoto, A. Nishimoto and Y. Ishihara, "Interaction between α-Alumina Surface and Polyacrylic Acid", Journal of the Ceramic Society of Japan, 100 (1), 7-12 (1992).

C17(RJ9) Y. Hirata, K. Takeshima and Y. Ishihara, "Synthesis of Whisker Reinforced Mullite Matrix Composites Using Colloidal Processing", Journal of the Ceramic Society of

Japan

, 100 (4), 353-361 (1992).

C18(IRP2) Y. Hirata, S. Nakagama and Y. Ishihara, "Forming of the Alumina Powder-Silicon Nitride Whisker System with Aqueous Suspension", in "Transactions of the Materials Research Society of Japan, Vol.5", Materials Research Society of Japan, 1992, Edited by S. Somiya, M. Doyama, M. Hasegawa, Y. Agata and K. Uematsu, pp. 47-67.

C19(RJ10) Y. Hirata, A. Nishimoto and Y. Ishihara, "Effects of Addition of Polyacrylic Ammonium on Colloidal Processing of α-Alumina", Journal of the Ceramic Society of Japan, 100 (8), 983-990 (1992)

C20(RJ11) Y. Hirata, I. Haraguchi and Y. Ishihara, "Particle Size Effects on Colloidal Processing of Oxide Powders", Journal of Materials Research, 7 (9), 2572-2578 (1992).

C21(RJ12) Y. Hirata and T. Ozaki, "Rheology and Consolidation of Aqueous Suspensions with Nanometer-sized BaTi₁-xZrxO₃ Powders", Materials Letters, 15 (1, 2), 31-34 (1992).

C22(RJ13) Y. Hirata and K. Takeshima, "Effects of Particle Classification on Colloidal Processing of Mullite", Materials Letters, 16 (4), 169-174 (1993).

C23(RJ14) Y. Hirata and M. Kawabata, "Dispersion and Consolidation of Ultrafine BaTiO₃ Powder in Non-aqueous Solutions", Materials Letters, 16 (4), 175-180 (1993).

C24(RJ15) Y. Hirata, S. Yamada, and Y. Fukushige, "Colloidal Processing of Silicon Carbide", Materials Letters, 16 (5), 295-299 (1993).

C25(RJ16) Y. Hirata and K. Takeshima, "Colloidal Processing for Laminated Composites of Mullite / Alumina Woven Fabrics", Materials Letters, 17 (3,4), 125-130 (1993).

C26(RP2) Y. Hirata, T. Ozaki and M. Kawabata, "Colloidal Processing of Nanometer-sized Ferroelectric Powders", in "Ceramic Transactions, Vol. 32, Dielectric Ceramics: Processing, Properties, and Application", The American Ceramic Society, Westerville, Ohio, 1993, Edited by K. M. Nair, J. P. Guha and A. Okamoto, pp. 251-260.

C27(RJ17) Y. Hirata and K. Takeshima, "Colloidal Processing for Preparation of Laminated Composites of Mullite / Woven Fabrics of Si-Ti-C-O Fibers", Materials Letters, 17 (6), 374-378 (1993).

C28(CR1) 平田好洋, 山田貞弘, 福重安雄,“屋久島の地域性を生かしたセラミックス材料の開発（炭化珪素のコロイドプロセッシング）”, 鹿児島大学南西地域資料研究センター報告特別号第5号, 35-40 (1994).

C29(RJ18) Y. Hirata, A. Nitta, and M. Kawabata, "Microstructure and Dielectric Properties of BaTiO₃ Prepared by Colloidal Processing", Journal of the Ceramic Society of Japan, 102 (12), 1168-1172 (1994).

C30(IP5) Y. Hirata, "Colloidal Processing", in Proceedings of the 8th CIMTEC-World Ceramics Congress & Forum on New Materials, Advances in Science and Technology 3C, 1995, pp.1533-1544.

C31(CP3) Y. Hirata and K. Hidaka, "Surface Characteristics and Colloidal Processing of Silicon Carbide", in Proceedings of International Symposium on Environmental Issues of Ceramics , The Ceramic Society of Japan, 1995, Edited by H. Yanagida and M. Yoshimura, pp.264-272.

C32(RJ19) Y. Hirata, Y. Otsubo and Y. Arimura, "Dissolution Behavior of α- Alumina in Solutions Containing Mg²⁺ Ions," Journal of the Ceramic Society of Japan, 103 (8), 782-785 (1995).

C33(RJ20) 神野好孝, 平田好洋, 国生徹郎, 浜石和人, 森田晴美, 田畑一郎, “Si-C-O繊維／アルミナ系材料の作製と力学的特性”, 日本セラミックス協会学術論文誌, 103 (10) , 1033-1036 (1995).

C34(RJ21) Y. Hirata, Y. Higashi and Y. Kamino, "Colloidal Processing for Preparation of Laminated Composite of New Zealand Kaolin/Woven Fabrics of Si-Ti-C-O Fibers", Materials Letters, 25 (1-2), 37-42 (1995).

C35(CR2) 神野好孝, 国生徹郎, 田畑一郎, 平田好洋, 浜石和人, 森田晴美,“コロイドプロセッシング法によるSi-C-O繊維／アルミナ複合材料の作製と機械的特性”, 鹿児島県工業技術センター研究報告, 第8号, 47-54 (1994).

C36(RJ22) Y. Hirata, R. Yamashita, M. Matsuda and M. Shibuya, "Observation of Interfaces of Si-Ti-C-O Fiber / Mullite Matrix Composites by Analytical Transmission Electron Microscopy", Journal of the Ceramic Society of Japan, 103 (11), 1197-1200 (1995).

C37(RJ23) Y. Hirata and K. Onoue, "Pressure Filtration of Aqueous Alumina Suspension", European Journal of Solid State and Inorganic Chemistry, 32 (7-8), 663-672 (1995).

C38(RJ24)　　Y. Hirata, "Processo Colloidal", Ceramugia, XXV (5), 271-276 (1995).

C39(RJ25) Y. Hirata, M. Matsuda, K. Takeshima, R. Yamashita, M. Shibuya, M. Schmucker and H. Schneider, "Processing and Mechanical Properties of Laminated Composites of Mullite / Woven Fabrics of Si-Ti-C-O Fibers", Journal of the European Ceramic Society, 16 (2), 315-320 (1996).

C40(CR3) 平田好洋, 日高浩二, 松村博昭, 山田貞弘, 福重安雄,“屋久島で合成された炭化ケイ素の加圧焼結と性質”, 鹿児島大学南西地域研究資料センター報告特別号第6号, 10-14 (1996).

C41(RJ26) S. Sameshima, Y. Arimura and Y. Hirata, "Effects of Addition of Polyacrylic Ammonium on Dissolution of α-Alumina in Solutions Containing Mg²⁺ Ions", Journal of the Ceramic Society of Japan, 104 (4), 268-272 (1996).

C42(CR4) 平田好洋, 山下良子, 松田　学, 竹島久美子,“セラミック織物強化複合材料のコロイドプロセッシング”, マツダ財団研究報告, 8, 79-86 (1996).

C43(RJ27) Y. Kamino, Y. Hirata and S. Kamata, "Preparation and Mechanical Properties of Alumina Long Fiber / Alumina Matrix Composites", Materials Letters, 28, 161-164 (1996).

C44(CP4) Y. Hirata, K. Miyano and S. Sameshima, "Hot-Pressing of Al Ions-adsorbed SiC Powder" in Proceedings of the 6th Tohwa University International Symposium, Frontier Nanostructured Ceramics, 1996, pp. 339-342.

C45(CP5) T. Matsura, Y. Hirata and M. Shibuya, "Synthesis and Microstructure of Si-Ti-C-O Polymer / Mullite Matrix Composite", in Proceedings of the 6th TohwaUniversity International Symposium, Frontier Nanostructured Ceramics, 1996, pp. 177-181.

C46(CP6) Y. Kamino, Y. Hirata and S. Kamata, "Fracture Behavior of Si-C-O Fibers / Alumina Matrix Composite", in Proceedings of the 6th Tohwa University International Symposium, Frontier Nanostructured Ceramics, 1996, pp. 165-170.

C47(CP7) Y. Kyoden, Y. Kamino, Y. Fukushige, Y. Hirata and M. Shibuya, "Oxidation and Mechanical Properties of Laminated Si-Ti-C-O Fibers / Mullite Matrix Composites", in Proceedings of the 6th Tohwa University International Symposium, Frontier Nanostructured Ceramics, 1996, pp. 171-175.

C48(RJ28) Y. Hirata, A. Nitta, S. Sameshima and Y. Kamino, "Dielectric Properties of Barium Titanate Prepared by Hot Isostatic Pressing", Materials Letters, 29, 229-234 (1996).

C49(RJ29) Y. Hirata and T. Kawazoe, "Wet Forming, Sintering Behavior and Dielectric Properties of BaTi_0.8Zr_0.2O₃", Journal of Materials Research, 11(12), 3071-3076 (1996).

C50(RJ30) Y. Hirata, "Theoretical Aspects of Colloidal Processing", Ceramics International, 23, 93-98 (1997).

C51(CR5) 神野好孝, 中重　朗, 田畑一郎, 浜石和人, 森田晴美, 平田好洋,“アルミナ長繊維／アルミナマトリックス複合材料の作成と機械的評価”, 鹿児島県工業技術センター研究報告, 第9号, 15-19 (1996).

C52(RJ31) Y. Hirata, K. Hidaka, H. Matsumura, Y. Fukushige and S. Sameshima, "Colloidal Processing and Mechanical Properties of Silicon Carbide with Alumina", Journal of Materials Research, 12(11), 3146-3157 (1997).

C53(RP3) Y. Kamino, Y. Tominaga and Y. Hirata, "Processing and Mechanical Properties of Polytitanocarbosilane-coated Alumina Fibers / Alumina Matrix Composites", in Proceedings of the 6th International Symposium on Ceramic Materials & Components for Engines, 1998, Edited by K. Niihara, S. Hirano, S. Kanzaki, K. Komeya and K. Morinaga, pp. 437-440.

C54(RP4) Y. Kyoden, Y. Kamino, Y. Fukushige, Y. Hirata and M. Shibuya, "Processing and Fracture Behavior of Laminated Si-Ti-C-O Fibers / Mullite Matrix Composites", in Proceedings of the 6th International Symposium on Ceramic Materials & Components for Engines, 1998, Edited by K. Niihara, S. Hirano, S. Kanzaki, K. Komeya and K. Morinaga, pp. 788-791.

C55(RJ32) S. Sameshima, K. Miyano and Y. Hirata, "Sinterability of SiC Powder Coated Uniformly with Al Ions", Journal of Materials Research, 13(4), 816-820 (1998).

C56 (RP5) Y. Hirata, K. Miyano, S. Sameshima and Y. Kamino, "Dissolution of SiC and Adsorption of Al Ions on SiC Surface in Colloidal Processing", in Proceedings of the 2nd International Meeting of Pacific Rim Ceramic Societies, 1999, pp. 6-12.

C57(IRP3) Y. Hirata, N. Numaguchi and W. H. Shih, "Dispersion and Consolidation of Ceramic Particles", in "Key Engineering Materials Vol. 159-160, Proceedings of International Symposium on Novel Synthesis and Processing of Ceramics", Trans Tech Publications, Switzerland, 1999, Edited by H. Suzuki, K. Komeya and K. Uematsu, pp. 127-134.

C58(RJ33) Y. Hirata, K. Miyano, S. Sameshima and Y. Kamino, "Reaction between SiC Surface and Aqueous Solutions Containing Al Ions", Colloids and Surfaces A: Physicochemical Engineering Aspects, 133, 183-189 (1998).

C59(CP8) Y. Hirata and W. H. Shih, "Colloidal Processing of Two-component Powder Systems", in Proceedings of the 9th CIMTEC-World Ceramics Congress & Forum on New Materials, Part B, 1999, Edited by P. Vincenzini, pp. 637-644

C60(RJ34) Y. Hirata and H. Wakita, "Electrical Properties of Alumina Suspensions", Journal of the Ceramic Society of Japan, 107 (4), 303-307 (1999).

C61(RJ35) Y. Hirata, M. Higashi and T. Yamamoto, "Evaluation of Powder Properties in Aqueous Processing of Microwave Dielectric Ceramics", Journal of the Ceramic Society of Japan, 107 (8), 702-706 (1999).

C62(RP6) X. H. Wang, H. Wakita and Y. Hirata, "Electrical Properties and Interaction between Colloidal Particles of Alumina Suspensions" in Proceedings of 16th International Japan - Korea Seminar on Ceramics, Okayama, 1999, pp. 110-113.

C63(RP7) R. Dong, Y. Hirata, A. Yoshitomi, K. Hayata, M. Higashi and K. Saegusa, "Properties and Consolidation of Aqueous Suspensions of the In₂O₃ -SnO₂System", in Proceedings of the 16th International Japan - Korea Seminar on Ceramics, Okayama, 1999, pp. 114-117.

C64(RJ36) Y. Hirata, R. Dong, A. Yoshitomi, K. Hayata, M. Higashi and K. Saegusa, "Rheological Properties and Pressure Filtration of In₂O₃- SnO₂ Suspensions", Journal of the Ceramic Society of Japan, 109 (1), 49-54 (2001).

C65(RJ37) X. H. Wang and Y. Hirata, "Electrical and Rheological Properties of Colloidal Alumina Suspensions", Journal of Ceramic Processing Research, 1 (1), 64-68 (2000).

C66(RP8) Y. Hirata and X. H. Wang, "Electrical Properties and Interaction between Colloidal Particles of Alumina Suspensions", in "Ceramic Transactions, Vol. 112, Ceramic Processing Science Ⅵ", The American Ceramic Society, Westerville, Ohio, 2001, Edited by S. Hirano, G. L. Messing and N. Clausen, pp. 167-172.

C67(RJ38) S. Tabata, S. Sameshima and Y. Hirata, "Interaction between SiC Surface and Y³⁺ Ions", Journal of Ceramic Processing Research, 3 (1), 29-33 (2002).

C68(RP9) S. Tabata, J. Ideue, U. Paik and Y. Hirata, "Interaction between Silicon Carbide and Polyacrylicacid", in Proceedings of the 18th International Japan-Korea Seminar on Ceramics, 2001, pp. 193-197.

C69(RP10) X. H. Wang, R. Shirakawa, Y. Hirata, Y. Hatate and K. Ijichi, "Colloidal Processing of the SiC-Al₂O₃-Y₂O₃ System", in Proceedings of the 18th International Japan-Korea Seminar on Ceramics, 2001, pp. 215-218.

C70(CR6) 平田好洋, 田畑周平, 井手上純, 鮫島宗一郎,“屋久島で製造された炭化ケイ素粉体のコロイドプロセスによる微細構造制御”, 鹿児島県新技術開発推進協議会調査研究報告書, No. 39, 9-22 (2002).

C71(RJ39) X. H. Wang, R. Shirakawa, Y. Hirata, Y. Hatate and K. Ijichi, "Colloidal Processing of the SiC-Al₂O₃-Y₂O₃ System", Journal of Ceramic Processing Research, 3(4), 265-270 (2002).

C72(RJ40) N. Hidaka, Y. Hirata and S. Sameshima, "Colloidal Processing of the SiC-Al₂O₃-Y³⁺Ions System and Sintering Behavior of the Consolidated Powder Compacts" , Journal of Ceramic Processing Research, 3(4), 271-277 (2002).

C73(IRP4) Y. Hirata and N. Hidaka, "Synthesis of Silicon Carbide Ceramics with 800 MPa of Flexural Strength Using Colloidal Processing", Proceedings of the 19th Korea-Japan International Seminar on Ceramics, 2002, pp.123-127.

C74(RJ41) A. Dietrich, A. Neubrand and Y. Hirata, "Filtration Behavior of Nanoparticulate CeO₂ Slurries", Journal of the American Ceramic Society, 85(11), 2719-2724 (2002).

C75(IP6) Y. Hirata, S. Tabata and J. Ideue, "Surface Chemistry of the Silicon Carbide-Polyacrylic Acide-Yttrium Ions System", Advances in Science and Technology 30, Proceedings of CIMTEC 2002 (10th International Ceramic Congress and 3rd Forum on New Materials, Part A), 2003, Edited by P. Vincenzini, Techna, Faenza, pp. 545-554.

C76(RJ42) Y. Hirata, S. Tabata and J. Ideue, "Interaction of the Silicon Carbide-Polyacrylic Acide-Yttrium Ions System", Journal of the American Ceramic Society, 86(1), 5-11 (2003).

C77(RJ43) Y. Hirata, K. Onoue and Y. Tanaka, "Effects of pH and Concentration of Aqueous Alumina Suspensions on Pressure Filtration Rate and Green Microstructure of Consolidated Powder Cake", Journal of the Ceramic Society of Japan, 111(2), 93-99 (2003).

C78(RJ44) Y. Hirata, X. H. Wang, Y. Hatate and K. Ijichi, "Electrical Properties, Rheology and Packing Density of Colloidal Alumina Particles", Journal of the Ceramic Society of Japan, 111(4), 232-237 (2003).

C79(RJ45) Y. Tanaka, Y. Hirata and R. Yoshinaka, "Synthesis and Characteristics of Ultrafine Hydroxyapatite Particles", Journal of Ceramic Processing Research, 4(4), 197-201 (2003).

C80(RJ46) H. Takahashi, H. Shimazu, Y. Hirata and S. Sameshima, "Interaction between Ultrafine Ceria Particles and Glycine", Journal of Ceramic Processing Research, 5(1), 25-29 (2004).

C81(RP11) Y. Hirata, H. Takahashi, H. Shimazu and S. Sameshima, "Dispersibility of Nanometer-Sized Ceria Particles", Ceramic Transactions, Vol. 152, Colloidal Ceramic Processing of Nano-, Micro-, and Macro-Particulate System, The American Ceramic Society, Westerville, Ohio, 2004, Edited by W. H. Shih, Y. Hirata and W. Carty, pp. 1-10.

C82(RP12) N. Hidaka and Y. Hirata, "Colloidal Processing and Liquid Phase Sintering of SiC-Al₂O₃-Y³⁺ Ions System", Ceramic Transactions, Vol. 152, Colloidal Ceramic Processing of Nano-, Micro-, and Macro-Particulate System, The American Ceramic Society, Westerville, Ohio, 2004, Edited by W. H. Shih, Y. Hirata and W. Carty, pp. 109-118.

C83(RP13) S. Tabata and Y. Hirata, "Colloidal Processing of SiC with 700 MPa of Flexural Strength", Ceramic Transactions, Vol. 152, Colloidal Ceramic Processing of Nano-, Micro-, and Macro-Particulate System, The American Ceramic Society, Westerville, Ohio, 2004, Edited by W. H. Shih, Y. Hirata and W. Carty, pp. 119-128.

C84(RJ47) Y. Koreeda, Y. Hirata and S. Sameshima, "Analysis of Microstructures of Two-component Powder Compact by Electrical Conductivity Measurement", Journal of the Ceramic Society of Japan, 112(5), Supplement Edition, S280-S285 (2004).

C85(RP14) X. H. Wang and Y. Hirata, "Hot-pressing and Mechanical Properties of SiC with Al₂O₃ and Y₂O₃, " Proceedings of the 20 th International Japan-Korea Seminar on Ceramics, 2003, pp. 391-394.

C86(RJ48) X. H. Wang and Y. Hirata, "Colloidal Processing and Mechanical Properties of SiC with Al₂O₃ and Y₂O₃, " Journal of the Ceramic Society of Japan, 112(1), 22-28 (2004).

C87(RJ49) M. Chaen and Y. Hirata, "Interaction between Ultrafine Hydroxyapatite Particles and Amino Acid", Transactions of Materials Research Society of Japan, 29(5), 2379-2382 (2004).

C88(RJ50) Y. Koreeda, Y. Hirata and S. Sameshima, Analysis of Particle Connection in Two-component Powder Compact by Electrical Conductivity Mensurement", Journal of Ceramic Processing Research, 5(4), 337-342 (2004).

C89(RJ51) S. Tabata, Y.　Hirata, S. Sameshima and Y. Uemura, "Colloidal Processing of SiC with Rare-earth Ion", Key Engineering Materials, 287, 123-128 (2005).

C90(RJ52) Y. Hirata, A. Harada and X.H.　Wang, "Wet Forming and Sintering Behavior of Nanometer-sized Ceria Powder", Ceramics International, 31, 1007-1013 (2005).

C91(RJ53) X.H.　Wang and Y. Hirata, "Influence of Polyacrylic Acid on Rheology of SiC Suspension and Mechanical Properties of Densified SiC", Ceramics International, 31, 677-681 (2005).

C92(RJ54) N.　Hidaka, Y.　Hirata, X.H.　Wang and S.　Tabata, "Aqueous Processing, Hot-pressing and Mechanical Properties of Silicon Carbide with Al₂O₃ and Y₂O₃", Journal of the Ceramic Society of Japan, 113(2), 143-148 (2005).

C93(RJ55) K.　Kishigawa and Y,　Hirata, "Packing Density and Consolidation Energy of Flocculated Aqueous SiC Suspension", Journal of the European Ceramic Society, 26(1-2), 217-221 (2006).

C94(RP15) K.　Kishigawa and Y.　Hirata, "Packing Density and Consolidation Energy of Flocculated Aqueous SiC Suspension", in Proceedings of the 21st Korea-Japan International Seminar on Ceramics, Gwangju, Korea, 2004, pp.533-536.

C95(RP16) M.　Chaen and Y.　Hirata, "Sintering Behavior of Nanometer-sized Hydroxyapatite Particles", in Proceedings of the 21st Korea-Japan International Seminar on Ceramics, Gwangju, Korea, 2004, pp.693-696.

C96(RJ56) N.　Hidaka and Y.　Hirata, "Mixing Effect of Nanometer-sized SiC Powder on Processing and Mechanical Properties of SiC Using Submicrometer-sized Powder", Journal of the Ceramic Society of Japan, 113(7), 466-472 (2005).

C97(RJ57) K.　Koreeda, Y.　Hirata, and S.　Sameshima, "Analysis of Microstructure of Two-Componert Powder Compact by Electrical Conductivity Measurement (part 2)", Journal of the Ceramic Society of Japan, 113(8), 534-539 (2005).

C98(RP17) K.　Nakamoto and Y.　Hirata, “Influence of Starting Particle Size on Processing and Mechanical Properties of SiC”, Proceedings of the 22nd International Japan-Korea Seminar on Ceramics, Nagoya, 2005, pp.455-458.

C99(RP18) Y.　Hirata and Y.　Tanaka, “Analysis of Consolidation Behavior of 68 nm Yttria- Stabilized Zirconia Particles During Pressure Filtration”, Proceedings of 6th Pacific Rim Conference on Ceramic and Glass Technology-PacRim6, The American Ceramic Society (CDR), 2006, 12 pages.

C100(RP19) N. Hidaka and Y. Hirata, “Sintering and Mechanical Properties of SiC Using Nanometer-Sized Powder”, 6th Pacific Rim Conference on Ceramic and Glass Technology-PacRim6, The American Ceramic Society (CDR), 2006, 12 pages.

C101(RJ58) S.　Tabata, Y.　Hirata, S.　Sameshima, N.　Matsunage and K.　Ijichi, “Liquid Phase Sintering　and Mechanical Properties of SiC with Rare-Earth Oxide”, Journal of the Ceramic Society of Japan, 114(3), 247-252 (2006).

C102(RJ59) K.　Kishigawa and Y.　Hirata, “Forming of Aqueous SiC Suspension by Pressure Filtration”, Journal of the Ceramic Society of Japan, 114(3), 259-264 (2006).

C103(RJ60) Y.　Hirata, M.　Nakamura, M.　Miyamoto, Y.　Tanaka and X.H.　Wang, “Colloidal Consolidation of Ceramic Nanoparticels by Pressure Filtration”, Journal of the American Ceramic Society, 89(6), 1883-1889 (2006).

C104(IRP5) Y.　Hirata,Y.　Tanaka and Y.　Sakamoto, “Packing Density and Consolidation Energy of Colloidal Particles through Pressure Filtration”, Advances in Science and Technology, Vol. 45, 2006, pp.471-478 (Proceedings of 11^th International Ceramics Congress and 4^th Forum on New Materials, CIMTEC 2006, Edited by P.Vincenzini, Trans Tech Publications).

C105(RP20) N.　Matsunaga, S.　Ueno, Y.　Tanaka and Y.　Hirata, “Colloidal Consolidation of Mixed Powders of the Alumina / Indium Tin Oxide System”, Ceramic Transactions, Vol.198, Characterization and Contrlo of Interfaces for High Quality Advanced Materials II, The American Ceramic Society , Published by John Wiley & Sons, Inc., Hoboken, New Jersey, 2007, Edited By K. Ewsuk, K. Nogi, R. Waesche, Y. Umatoshi, T. Hinklin, K. Uematsu, T. Tomsia, H. Abe, H. Kamiya and M. Naito, pp.153-158.

C106(RJ61) N.　Matsunaga, N.　Hidaka, S.　Sameshima and Y.　Hirata, “Mechanical Properties of SiC Processed with Nanometer-sized Powder and Polytitanocarbosilane”, Key Engineering Materials, 352, 73-76(2007).

C107(RJ62) Y. Hirata, N. Matsunaga, N. Hidaka, T. Maeda, T. Arima and S. Sameshima, “Improvement of Strength, Weibull Modulus and Damage Tolerance of SiC”, Materials Seience Forum, 561-565, 489-494(2007).

C108(RJ63) M. Murao, T. Maeda, N. Matsunaga, S. Sameshima and Y. Hirata, “Electrodeposition of an Alumina Precursor on a Silicon Carbide Surface”, Journal of Ceramic Processing Research, 8(5), 312-315(2007).

C109(RP21) H. Uchima, Y. Hirata, S. Sameshima, N. Matsunaga, “Colloidal Consolidation of Al₂O₃-ITO Particles Under Electric Field”, Proceedings of the 24th International Japan-Korea Seminar on Ceramics, 2007, pp.431-434.

C110(RJ64) Y. Tanaka, Y. Hirata, N. Matsunaga, M. Nakamura, S. Sameshima and T. Yoshidome, “Pressure Filtration of Nanometer-sized SiC Powder”, Journal of the Ceramic Society of Japan, 115(11), 786-791(2007).

C111(RU65) Y. Hirata and Y. Tanaka, “Pressure Filtration Model of Ceramic Nanoparticles”, Journal of the American Ceramic Society, 91(3), 819-824(2008).

C112(RJ66) Y. Hirata and Y. Tanaka, “Thermodynamics of Colloidal Suspensions”, Journal of Ceramic Processing Research, 9(4), 362-371(2008).

C113(RP22) Y. Hirata, N. Matsunaga, N. Hidaka, S. Tabata and S. Sameshima, “Processing of High Performance Silicon Carbide”, Proceedings of 2nd International Symposium on SiAlONS and Non-Oxides, Key Engineering Materials, 403, 165-168 (2009).

C114(RJ67) Y. Hirata, N. Matsunaga, N. Hidaka, S. Tabata and S. Sameshima, “Processing of High Performance Silicon Carbide”, Journal of the Ceramic Society of Japan, 2008, 116(6), 665-673(2008).

C115(RJ68) Y.　Hirata, H.　Uchima, Y.　Tanaka, N.　Matsunaga,”The Effect of Electric Field on Pressure Filtration of Ceramic Suspensions”, Journal of the American Ceramic Society, 92(S1), S57-S62(2009).

C116(RJ69) Y.　Hirata, Y.　Tanaka, S.　Nakagawa and N.　Matsunaga, “Pressure Filtration of Colloidal SiC Suspensions”, Journal of Ceramic Processing Research, in press, 2009.

C117(IP7) Y.Hirata, N.Matsunaga and S.Sameshima, “Phase Diagram and Consolidation of Colloidal Nanoparticles”, Proceedings of 5th Fulrath Memorial International Symposium on Advanced Ceramics, 2009, pp.31-34.

C118(RP23) S.Baba, Y.Hirata, N.Matsunaga and S.Sameshima,“Pressure Filtration of Phenylalanine-adsorbed Submicrometer Silicon Carbide”, Ceramic Transactions, Vol.219, Characterization and Control of Interface for High Quality Advanced Matrials III, The Amercan Ceramic Society, John Wiley & Sons. Inc., Publication, Hoboken, New Jersey, 2010, Edited by K.Ewsuk, M.Naito, T.Kakeshita, S.Kirihara, K.Uematsu and H.Abe, pp.105-110.

C119(IRP6) Y.Hirata, N.Matsunaga and S.Sameshima, “Phase Transition and Consolidation of Colloidal Nanoparticles”,Ceramic Transactions, Vol.223, Processing of Nanoparticles and Nanostructured Films, The Amercan Ceramic Society, John Wiley & Sons. Inc., Publication, Hoboken, New Jersey, 2010, Edited by Kathy Lu, Chris Li, Eugene Medvedovsk iand Eugene A. Olevsky pp.101-112.

C120(CP9) Y.Hirata, N.Matsunaga and S.Sameshima,”Phase Transition and Analysis of Consolidation Process of Colloidal Nanoparticles under Applied Pressure”, Proceedings of the 15th SCEJ Symposium on Fluidization & Particle Processing, Fluidization Research Group, Fluid & Particle Processing Division, The Society of Chemical Engineers, Japan, Kagoshima, 2009, pp.20-23.

C121(RJ70) Y.Hirata, N.Suzue, N.Matsunaga and S.Sameshima, “Particle Size Effect of Starting SiC on Processing, Microstructure and Mechanical Properties of Liquid Phase-Sinterd SiC”, Journal of the European Ceramic Society, 30, 1945-1954 (2010).

C122(IP8) Y.Hirata, K.Matsushima, S.Baba, N.Matsunaga and S.Sameshima,” Theoretical and Experimental Analyses of Colloidal Processing of Nanoparticles”, Proceedings of the 12th International Ceramic Congress, CIMTEC, Advances in Science and Technology, 62, 131-140 (2010).

C123(RJ71) N.Matsunaga, Y.Nakashima, Y.Hirata and S.Sameshima,”Rheology and Pressure Filtration of Aqueous SiC Suspensions of Bimodal Size Particles”, Ceramics Interanational, 36, 1581-1588 (2010).

C124(RJ72) K.Matsushima, Y.Hirata, N.Matsunaga and S.Sameshima,”Pressure Filtration of Alumina Suspensions under Alternating Current Field”, Colloids and Surfaces A: Physicochemical and Engineering Aspects”, 364, 138-144 (2010).

C125(CP10) Y.Hirata, N.Matsunaga, S.Sameshima and J.G.Wen, “Influence of Oxide Additives and Starting Particle Size of SiC on Densification and Mechanical Properties of Hot-pressed SiC”, Proceedings of High Temperature Ceramic Matrix Composites (HT-CMC7), AVISO Verlagsgesellschaft mBH, 2010, Edited by W.Krenkel and J.Lamon, pp.875-880.

C126(RJ73) Y.Hirata, K.Matsushima, N.Matsunaga and S.Sameshima,“Viscoelastic Properties of Flocculated Alumina Suspensions during Pressure Filtration”, Journal of the Ceramic Society of Japan, 118(11), 977-982 (2010).

C127(RJ74) N.Matsunaga, A.Yamashita and Y.Hirata,“Consolidation Behaviour of Nanometer-sized SiC Particles with Phenylalanine through Presure Filtration at 1MPa”, Journal of the Ceramic Society of Japan, 119(3), 161-167 (2011).

C128(IP9) Y.Hiarat, N.Matsunaga and S.Sameshima,”Densification, Phases, Microstructures and Mechanical Properties of Liquid Phase-sintered SiC”, Key Engineering Materials, 484, 124-129(2011).

C129(RJ75) S.Baba, Y.Hirata, N.Matsunaga,S.Sameshima, “The Effect of Amino Acid of Low Molecular Weight on Consolodation of Nanoparticle Suspensions”, Journal of Ceramic Processing Research, 13(6), 788-790 (2013).

C130(RJ76) Y.Akune, Y.Hirata, N.Matunaga, S.Sameshima, “Temperature Dependence of Dynamic Moduli of Alumina Suspensions and Alumina Powder Compacts”, Ceramics International, 39, 3353-3358 (2013).

C131(RJ77) Y.Hirata, Y.Fukunaga, N.Matunaga, S.Sameshima, “Influence of Pressure on Filtration of Aqueous Alumina Suspensions”, Ceramics International, 39, 3547-3554 (2013).

C132(RJ78) K.Hayano, Y.Hirata, S.Sameshiuma, T.Shimonosono, “Influence of Phenylalanine on Viscoelastic Properties of Alumina Suspensions, Journal of the Cedramic Society of Japan, 122(8), 586-590 (2014).

C133(RJ79) Y. Hirata, S. Sameshima, T. Shimonosono, Y. Suga, K. Takehara, K. Hayano, “Influence of Phenylalanine Dispersant on Colloidal Processing of Alumina Particles, Ceramics International, 41, 14798-14804 (2015).

C134(RJ80) T.Ueno, Y.Hirata, T.Shimonosono, “Analysis of Compressive Deformation Behavior of Wet Powder Compacts of Nanometer-sized Yttria-stabilized Zirconia Particles”, Ceramics International, 42, 1926-1932 (2016).

D1(RJ1) 福重安雄, 平田好洋, 鷺山正文, 島田欣二,“窒化ケイ素－炭化ケイ素系複合材料の焼結とビッカース硬度”, 窯業協会誌, 94 (6), 604-606 (1986).

D2(CR1) 島田欣二, 福重安雄, 平田好洋, 鷺山正文, 小倉克彦,“窒化ケイ素－炭化ケイ素系複合粉体の焼結”, 旭硝子工業技術奨励会研究報告, 49, 101-109 (1987).

D3(RJ2) Y. Hirata, H. Kyoda and H. Hatano, "Infiltration of Nickel in Porous Alumina by Electrodeposition", Materials Letters, 21 (10), 155-159 (1994).

D4(RJ3) Y. Hirata, H. Kyoda, T. Iwamoto and K. Hamasaki, "Electrodeposition of Nickel into Porous Alumina Compact", Journal of the Ceramic Society of Japan, 103 (5), 460-463 (1995).

D5(RP1) Y. Hirata, H. Kyoda, T. Iwamoto, H. Hatano and K. Hamasaki, "Infiltration of Nickel into Alumina Compact by Electrodeposition", in "Ceramic Transactions Vol.51, Ceramic Processing Science and Technology", The American Ceramic Society, 1995, pp. 237-241.

D6(RJ4) Y. Hirata, H. Hatano and H. Kyoda and K. Hamasaki, "Synthesis of Alumina / Nickel Composite by Electrodeposition of Nickel", Journal of Materials Research, 10 (11), 2697-2699 (1996).

D7(CR2) 神野好孝, 平田好洋, 袖山研一, 浜石和人,“Si－C－O繊維／アルミナ基複合材料の破壊挙動”, 鹿児島県工業技術センター報告, 第10号, 45-51 (1997).

D8(RJ5) 小野孝, 梶正己, 平田好洋,“Si－Ti－C－O繊維／ムライトマトリックス系複合材料の鞍状曲げ試験における破壊挙動”, 日本セラミックス協会学術論文誌, 106 (11), 1147-1150 (1998).

D9(CR3) 神野好孝, 袖山研一, 浜石和人, 平田好洋,“炭素短繊維／シラスガラス複合材料の作製と破壊挙動”, 鹿児島県工業技術センター報告, 第11号, 25-29 (1998).

D10(RP2) Y. Hirata, K. Nishikawa, Y. Fukushige and M. Tajika, "Synthesis of AlN-Dispersed Oxides (Silica, Mullite) Matrix Composites by Sol-Gel Method, in "Key Engineering Materials, Vol. 159-160, Proceedings of International Symposium on Novel Synthesis and Processing of Ceramics", Trans Tech Publications, Switzerland, 1999, Edited by H. Suzuki, K. Komeya and K. Uematsu, pp. 353-358.

D11(RP3) Y. Hirata, J. Nakamura and S. Hori, "Mechanical Properties of TiC-coated Graphite", in "Key Engineering Materials Vol. 161-163, Proceedings of the 2nd International Symposium on the Science of Engineering Ceramics", Trans Tech Publications, Switzerland, 1999, Edited by K. Niihara, T. Sekino, E. Yasuda and T. Sasa, pp. 279-282.

D12(RP4) Y. Hirata, K. Hayata and T. Matsura, "Processing and Microstructure of Si-Ti-C-O Fabrics / Mullite Powder / Polytitanocarbosilane System", in Proceedings of the 3rd International Nano Ceramic Forum and the 2nd International Symposium on Intermaterials, 1999, pp. 58-65.

D13(RJ6) Y. Hirata, T. Matsura and K. Hayata, "Infiltration and Pyrolysis of Polytitanocarbosilane in an Si-Ti-C-O Fabrics / Mullite Porous Composite", Journal of the American Ceramic Society, 83 (5), 1044-1048 (2000).

D14(RJ7) Y. Hirata, R. Yamashita and M. Shibuya, "Microstructure and Crack Extension of Laminated Si-Ti-C-O Fabrics / Mullite Matrix Composites", Materials Chemistry and Physics, 69, 252-260 (2001).

D15(RJ8) 小野　孝, 京田享博, 平田好洋,“Si－Ti－C－O繊維／ムライト積層材料の鞍状曲げ破壊に及ぼす繊維節の影響”, Journal of the Ceramic Society of Japan, 108 (4), 424-427 (2000).

D16(RJ9) R. Dong and Y. Hirata, "Processing of Ceria - coated Alumina Fiber / Alumina Matrix Composite", Journal of the Ceramic Society of Japan, 108 (9), 823-829 (2000).

D17(RP5) R. Dong and Y. Hirata, "Surface Treatment of Alumina Fiber with Ceria", in "Ceramic Transactions, Vol. 112, Ceramic Processing Science Ⅵ", The American Ceramic Society, Westerville, Ohio, 2001 Edited by S. Hirano, G. L. Messing and N. Clausen, pp. 815-820.

D18(RJ10) Y. Niibo, K. Yuchi, S. Sameshima and Y. Hirata, "Processing and Mechanical Properties of Mullite Fiber / Fe Composite", Journal of Ceramic Processing Research, 1 (2), 83-87 (2001).

D19(CP1) Y. Hirata, Y. Nakashima, Y. Niibo, S. Sameshima, S. Uchida, S. Hamauzu and S. Kurita, "Synthesis and Mechanical Properties of the Al₂O₃ / Fe System", in Proceedings of the Symposium on Refractories for the Next Millennium - The Ninth Symposium on Refractories for the Alumina Industry, The American Ceramic Society's Pacific Coast Regional Basic Science Division and Electronics Division Meeting, Bellevue, WA, 1999, published by The Minerals, Metals and Materials Society, 2000, Edited by G. Oprea, pp. 95-108.

D20(CP2) R. Dong, H. Sueyoshi, M. Higo, Y. Uemura and Y. Hirata, "Coating of SiC Fibers with Yb-doped Ceria", in "High Temperature Ceramic Matrix Composites", Wiley-VCH, 2001, Edited by W. Krenkel, R. Naslain and H. Schneider, pp. 157-163.

D21(RJ11) 末吉秀一, 丸野智仁, 山本浩市, 平田好洋, 鮫島宗一郎, 内田　秀, 濱渦修一, 栗田澄彦,“セラミック連続繊維／Fe 合金複合材料のプロセッシング”, 日本金属学会誌, 65 (10), 961-966 (2001).

D22(RJ12) R. Dong, H. Sueyoshi, M. Higo, Y. Uemura and Y. Hirata, "Processing of SiC Fiber / Alumina-Mullite Matrix Composite", Journal of Ceramic Processing Research, 2 (2), 72-78 (2001).

D23(RP6) S. Sameshima, T. Uezone, Y. Niibo, Y. Nakashima, H. Sueyoshi and Y. Hirata, "Processing of the Alumna Fibers-Fe Composite", in Proceedings of the 18th Japan-Korea International Ceramics Seminar, 2001, pp. 183-187.

D24(RP7) N. Kobayashi, S. Sameshima and Y. Hirata, "High Temperature Chemical Reaction and Wetability between High-Speed Steel and Alumna", in Proceedings of the 18th Japan-Korea International Ceramics Seminar, 2001, pp. 188-192.

D25(RP8) R. Yoshinaka, Y. Hirata and H. Maruyama, "Microstructure Control and Fracture Behavior of Porous Apatite Ceramics", in Proceedings of the 18th Japan-Korea International Ceramics Seminar, 2001, pp. 208-212.

D26(CP3) Y. Nakamura, S. Kasuga, J. Nakamura and Y. Hirata, "Mechanical Properties of Si-Ti-C-O Fabric / Polytitanocarbosilane / Mullite Laminated Composites", in "High Temperature Ceramic Matrix Composites", Wiley-VCH, 2001, Edited by W. Krenkel, R. Naslain and H. Schneider, pp. 721-727.

D27(RP9) Y. Hirata, S. Sameshima, Y. Nakashima, Y. Niibo, T. Uezono, H. Sueyoshi, S. Uchida, S. Hamauzu and S. Kurita, "Microstructure and Mechanical Properties of Oxide Fibers / High Speed Steel Composites", 2001年度傾斜機能材料論文集, 2002, pp. 103-108.

D28(RJ13) N. Kobayashi, S. Sameshima and Y. Hirata, "Molten State Processing of Alumina Fiber / High-Speed Steel Composite", Journal of Ceramic Processing Research, 3(2), 52-56 (2002).

D29(RJ14) Y. Hirata, T. Maeda and T. Ono, "Impregnation and Pyrolysis of Polytitanocarbosilane in an Si-Ti-C-O Fabric / Mullite Porous Composite and Tensile Strength of the Densified Composite", Journal of Ceramic Processing Research, 3(4), 241-246 (2002).

D30(RP10) R. Dong, Y. Hirata, H. Sueyoshi, M. Higo and Y. Uemura, "Synthesis of Continuous Fibers-reinforced Mullite Matrix Composites by Polymer Impregnation and Pyrolysis Method", in Proceedings of the 19th Korea-Japan International Seminar on Ceramics, 2002, pp.344-348.

D31(RP11) T. Hashiguchi, Y. Hirata and S. Sameshima, "Thermal Shock Resistance of Mullite Fibers / High-speed Steel Composites", in Proceedings of the 19th Korea-Japan International Seminar on Ceramics, 2002, pp.133-137.

D32(RJ15) 末吉秀一, 丸野智仁, 浅野正大, 平田好洋, 鮫島宗一郎, 内田　秀, 濱渦修一, 栗田澄彦, “セラミック連続繊維強化Fe合金基複合材料のプロセッシング”, 日本金属学会誌, 66(7), 677-683 (2002).

D21′(RJ11′) H. Sueyoshi, T. Maruno, K. Yamamoto, Y. Hirata, S. Sameshima, S. Uchida, S. Hamauzu and S. Kurita, "Processing of a Continuous Ceramic Fibers/Iron Alloy Composite", Materials Transactions, 13(4), 735-740 (2002).

D32′(RJ15′) H. Sueyoshi, T. Maruno, M. Asano, Y. Hirata, S. Sameshima, S. Uchida, S. Hamauzu and S. Kurita, "Processing of a Continuous Ceramic Fiber-Reinforced Iron Alloy", Materials Transactions, 43(11), 2866-2872 (2002).

D33(IP1) Y. Hirata, S. Sameshima, H. Sueyoshi, S. Uchida, S. Hamauzu and S. Kurita, "Production of Long Fiber Reinforced Metal Matrix Composites", in Proceedings of US-Japan Workshop-Low Cost Production of Ceramics and Related Materials, 2003, Edited by K. Niihara and R. Tressler, pp. 90-98.

D34(RJ16) R. Dong, Y. Hirata, H. Sueyoshi, M. Higo and Y. Uemura, "Polymer Impregnation and Pyrolysis (PIP) Method for the Preparation of Laminated Woven Fabric / Mullite Matrix Composites with Pseudoductility", Journal of the European Ceramic Society, 24(1), 53-64 (2004).

D35(RJ17) Y. Hirata, K. Hayata, T. Maeda and M. Shibuya, "Preparation of Silicon-Titanium-Carbon- Oxygen Fabric / Mullite Filler / Polytitanocarbosilane Laminates by Polymer Impregnation and Pyrolysis (PIP) Method", Journal of the American Ceramic Society, 87(6), 996-1001 (2004).

D36(RJ18) T. Maeda, Y. Hirata and M. Shibuya, "Processing, Microstructures and Mechanical Properties of Laminated Composites of the Si-Ti-C-O Fabric / Ceramic Filler / Polytitanocarbosilane System with Pseudoductility by Polymer Impregnation and Pyrolysis (PIP) Method", Journal of the Ceramic Society of Japan, 112(5), Supplement Edition, S377-S384 (2004).

D37(RJ19) J. Sugimoto, Y. Hirata, M. Shibuya, "Tensile Strength and Weibull Modulus of the Si-Ti-C-O Fiber Yarn and Woven Fabric", Journal of the Ceramic Society of Japan, 112(5), Supplement Edition, S385-S389 (2004).

D38(RJ20) Y. Hirata and R. Dong, "Processing and Mechanical Properties of Fiber-reinforced Oxide Matrix Composite with High Damage Tolerance", Journal of the Ceramic Society of Japan, 112(5), Supplement Edition, S264-S270 (2004).

D39(RP12) R. Dong and Y. Hirata, "Effects of Heat-treatment on Mechanical Properties of Laminated Fabric (SiC and Aluminosilicate) / Mullite Matrix Composites, Proceedings of the 20th International Japan-Korea Seminar on Ceramics, 2003, pp. 337-340.

D40(RJ21) R. Dong and Y. Hirata, "Influence of Heat Treatment on Phases, Microstructures and Mechanical Properties of Laminated Fabric (SiC and Aluminosilicate) / Mullite Matrix Composites", Journal of the Ceramic Society of Japan, 111 (12), 912-918 (2003).

D41(RJ22) T. Hashiguchi, Y. Hirata and S. Sameshima, "Mechanical Properties and Thermal Shock Resistance of Hot-pressed High-speed Steel", Transactions of Materials Research Society of Japan, 29(8), 3461-3464 (2004).

D42(RJ23) T. Nakazono, S. Sameshima and Y. Hirata, "Thermal Expansion of the Mullite Fiber / High-speed Steel Composite", Transactions of Materials Research Society of Japan, 29(8), 3465-3468 (2004).

D43(RP13) Y. Hirata, J. Sugimoto, T. Maeda, S. Sameshima, T. Yoshidome and M. Shibuya, "Tensile Fracture Behavior of Si-Ti-C-O Fiber Bundle (Yarn), Woven Fabric of Yarn and Laminated Composite of the Si-Ti-C-O Fabric / Mullite Filler / Polytitanocarbosilane System", in Proceedings of High Temperature Ceramic Matrix Composites 5 (CDR), 2004, Edited by M.Singh, R.J.Kerans, E.Lara-Curzio and R.Naslain, The American Ceramic Society, Westerville,Ohio, pp. 23-28.

D44 (RJ24) N. Hidaka, Y. Hirata, S. Sameshima and H. Sueyoshi, "Hot-pressing and　Mechanical Properties of SiC Ceramics with Polytitanocarbosilane", Journal of Ceramic Processing Research, 5(4), 331-336 (2004).

D45(RJ25) T. Maeda, Y. Hirata, J. Sugimoto, S. Sameshima, T. Yoshidome and M. Shibuya, "Comparison of Tensile Fracture Behavior between Si-Ti-C-O Fiber Bundle (Yarn), Woven Fabric of Yarn and Laminated Composite of the Si-Ti-C-O Fabric / Mullite Filler / Polytitanocarbosilane System", Key Engineering Materials, 287, 432-437 (2005).

D46(RJ26) R.Dong and Y. Hirata, "Influence of Heat Treatment on Phases, Microstructures and Mechanical Properties of Laminated Fabric (SiC and Aluninosilicate)/Mullite Matrix Composites, Part, 2", Journal of the Ceramic Society of Japan, 113(2), 135-142 (2005).

D47(RJ27) T.Arima, Y.Hirata and Matsunaga, “Influence of Crack Healing on Mechanical Properties of SiC Fabric/ SiC-Al₂O₃ Matrix Laminates”, Key Engineering Materials, 352, 49-52(2007).

D48(RJ28) N. Matsunaga, Y. Hirata, Y. Fukuda and S. Sameshima, “Preparation of Titania-coated Alumina Film by Electrolysis of TiCl₄-containing Solution”, Ceramics International, 35, 693-698 (2009).

D49(RJ29) T. Arima, Y. Hirata, N. Matsunaga, S. Sameshima, M. Shibuya, “Processing, Damage Tolerance and Crack Healing in the Silicon Carbide Fabric-covered Silicon Carbide Composite”, Journal of the Ceramic Society of Japan, 116(4), 519-524 (2008).

D50(RJ30) Y.Hirata, N.Matsunaga, T.Arima and S.Sameshima, “Joining of High Damage Tolerant SiC Fabric to High Strength SiC, Materials Science and Engineering B, 161, 175-181(2009).

E1(RJ1) 島田欣二, 福重安雄, 平田好洋,“シラスガラスの炭素還元法によって得られる窒化物”, 窯業協会誌, 86 (1), 5-12 (1978).

E2(CR1) 島田欣二, 福重安雄, 平田好洋, 末川幸弘,“シラスを原料とする炭化物焼結体の製造とその物性に関する研究－シラスガラスからの炭化物粉体の合成について”, 鹿児島県資源開発協議会調査研究報告, No.19, 1-10 (1982).

E3(CR2) 島田欣二, 福重安雄, 平田好洋, 末川幸弘,“シラスを原料とする炭化物焼結体の製造とその物性に関する研究－焼結体の作製とその性質について”, 鹿児島県資源開発協議会調査研究報告, No.20-1, 2-17 (1983).

E4(CR3) 島田欣二, 福重安雄, 平田好洋, 井田重信,“シラスの工業的利用に関する研究（第18報）シラスガラス－マグネシア－ジルコニア系におけるガラス化領域と同系ガラスの二、三の性質”, 鹿児島大学工学部研究報告, No.25, 95-98 (1983).

E5(RJ2) 島田欣二, 福重安雄, 平田好洋, 末川幸弘,“シラスガラスとカ－ボンブラックから得られる炭化ケイ素粉体”, 窯業協会誌, 92 (3), 118-125 (1984).

E6(RJ3) 平田好洋, 末川幸弘, 島田欣二,“シラスガラスの炭化によって得られたβ-SiC粉体の常圧及び加圧焼結”, 窯業協会誌, 92 (3), 126-134 (1984).

E7(CR4) 島田欣二, 福重安雄, 平田好洋,“シラスから得られた炭化物セラミックスの応用的研究”, 鹿児島県資源開発協議会調査研究報告, No.20-1, 2-13 (1984).

E8(CR5) 島田欣二, 福重安雄, 平田好洋, 西牟田幸治,“火山作用と関係ある無定形ケイ酸の性質とその応用的研究（第34報）オパール状物質の合成（その２）”, 鹿児島大学工学部研究報告, No.26, 53-59 (1984).

E9(CR6) 福重安雄, 平田好洋, 松下浩司, 島田欣二,“シラスの工業的利用に関する研究（第21報）シラスガラスから得られる炭化ケイ素焼結体の機械的性質及び耐化学薬品性・耐酸化性”, 鹿児島大学工学部研究報告, No.26, 61-66 (1984).

E10(CR7) 島田欣二, 福重安雄, 平田好洋, 松下浩司,“火山作用と関係ある無定形ケイ酸の性質とその応用的研究（第35法）オパール質ケイ石を原料とするケイ酸石灰塩水和物の合成”, 鹿児島大学工学部研究報告, No.28, 125-135 (1986).

E11(CR8) 島田欣二, 福重安雄, 平田好洋, 中内則男,“シラスの工業的利用に関する研究（第22報）鹿児島県吉田産シラスの性質とメカノケミストリー”, 鹿児島大学工学部研究報告, No.28, 137-144 (1986).

E12(CP1) Y. Hirata, S. Kurio and K. Shimada, "Effect of Addition of CaO and ZnO on the Structure and Properties of Shirasu Glass", in Proceedings of the Kagoshima International Conference on Volcanoes, Kagoshima, Kagoshima Prefectural Government, 1988, pp. 778-781.

E13(CR9) Y. Hirata, T. Kodama and K. Shimada, "Hydrothermal Synthesis of ZSM-5 Zeolite from Silicious Stone Produced in Ioh Island, Kagoshima, Japan", The Research Report of the Kagoshima Science Scholarship Foundation, No.1, 60-72 (1990).

E14(RJ4) Y. Hirata, T. Kodama, K. Shimada and Y. Ishihara, "Synthesis of ZSM-5 Zeolite from Silica Stone Occurred in Ioh Island, Kagoshima Prefecture, Japan", Journal of the Ceramic Society of Japan, 99 (11), 1138-1143 (1991).

E15(RJ5) Y. Hirata, T. Kodama, K. Shimada and Y. Ishihara, "Characterization of ZSM-5 Zeolite Synthesized from Silica Stone (Ioh Island, Kagoshima Prefecture)", Journal of the Ceramic Society of Japan, 99 (11), 1255-1259 (1991).

E16(CR10) 平田好洋, 江崎雄二, 島田欣二,“サンゴ石灰岩と重金属水溶液との反応”, 鹿児島県資源開発協議会調査研究報告, No. 29-1, 31-39 (1992).

E17(CR11) 平田好洋, 浜崎桂二, 福重安雄,“シラスバルーン軽量焼結体の耐熱と破壊予知”, 鹿児島県資源開発協議会調査研究報告, No. 31-1, 31-39 (1994).

E18(CR12) 幡手泰雄, 越牟田聡, 上村芳三, 平田好洋, 伊地知和也,“シラスマイクロバルーン製造装置の開発”, 鹿児島大学工学部研究報告, 第36号, 95-99 (1994).

E19(CP2) Y. Hirata, K. Hamasaki and Y. Fukushige, "Thermal Shock Resistance and Dielectric Properties of Shirasu Balloon / Ferroelectric Composite", in Proceedings of International Symposium on Environmental Issues of Ceramics, the Ceramic Society of Japan, 1995, Edited by H. Yanagida and M. Yoshimura, pp. 255-263.

E20(RJ6) Y. Hirata, Y. Fukushige, H. Kuwazuru, R. Yamashita, S. Sameshima and Y. Kamino, "Electrical Properties of Carbon Fiber / Shirasu Glass Composite", Journal of Physics and Chemistry of Solids, 58 (9), 1443-1449 (1997).

E21(RP1) Y. Kamino, Y. Hirata, K. Sodeyama, Y. Fukushige, S. Sameshima and S. Kamata, "Preparation and Mechanical Properties of Carbon Fibers / Shirasu Glass Composites", in Proceedings of the 5th Japan International Sample Symposium, Society for the Advancement of Material and Process Engineering, 1997, pp. 523-528.

E22(CR14) 福重安雄, 平田好洋,“微粒シラスバル－ンの強度”, 鹿児島県資源開発協議会調査研究報告, No. 35-1, 16-20 (1998).

E23(CR15) 鮫島宗一郎, 平田好洋,“微粒シラスバルーンを用いた多孔質セラミックスの製造”, 鹿児島県資源開発協議会調査研究報告, No. 37-1, 21-28 (2000).

E24(RP2) S. Kuwaharada, Y. Hirata, K. Sodeyama and T. Terao, "Lightweight Pottery with Fine Shirasu balloon", in Proceedings of the 17th International Korea-Japan Seminar on Ceramics, 2000, pp. 87-91.

S1(RJ1) Y. Hirata, N. Matsunaga and M. Murao, “Synthesis of Gadolinium-Doped Ceria Powders by Electrolysis of Aqueous Solutions”, Journal of the American Ceramic Society, 92(S1), S11-S15(2009).

S2(RJ2) N. Matsunaga, K. Nakahama, Y. Hirata and S. Sameshima, “Enhancement of Strength of SiC by Heat-treatment in Air”, Journal of Ceramic Processing Research, 10(3), 319-324 (2009).

S3(RJ3) S. Sameshima, Y. Hirata, K. Hamasaki, H. Ohshige and N. Matsunaga, “Synthesis of Hydrogen-Carbon Monoxide Fuel from Methane-Carbon Dioxide Mixed Gases”, Journal of the Ceramic Society of Japan, 117(5), 630-634 (2009).

S4(RJ4) Y. Hirata, A. Hara and I.A. Aksay, “Thermodynamics of Densification of Powder Compact”, Ceramics International, 35, 2667-2674 (2009).

S5(RJ5) Y. Hirata, “Thermal Conduction Model of Metal and Ceramics”, Ceramics International, 35, 3259-3268 (2009).

S6(RJ6) Y. Hirata, “Representation of Thermal Conductivity of Solid Material with Particulate Inclusionon”, Ceramics International, 35, 2921-2926 (2009).

S7(RP1) N.Matsunaga, K.Oshiro, Y.Hirata, Y.Fukuda, S.Sameshima, T.Yoshidome and T.Ishigaki, “Structure and Photochemical Prpoperty of TiO₂-In₂O₃-SnO₂-Al₂O₃ Film Prepared by Electrolysis of Aqueous Solution”, Ceramic Transactions, Vol.219,Characterization and Control of Interface for High Quality Advanced Matrials III, The Amercan Ceramic Society, John Wiley & Sons. Inc., Publication, Hoboken, New Jersey, 2010, Edited by K.Ewsuk, M.Naito, T.Kakeshita, S.Kirihara, K.Uematsu and H.Abe, pp.337-343.

S8(RJ7) Y.Hirata, T.Hanada, N.Matsunaga, and S.Sameshima,”Synthesis of Nanometer-sized Ceria Particles by Alternating Current Electrolysisi of Aqueous Solution”, Materials Chemistry and Physics, 125(1-2), 102-108 (2010).

S9(RJ8) Y.Okuzono, Y.Hirata, N.Matsunaga and S.Sameshima,”Young’s Modulus and Poisson Ratio of Liquid Phase-sintered Silicon Carbide”, Key Engineering Materials, 484, 98-101(2011).

S10(RJ9) Y.Hirata, N.Matsunaga, J.Yoshitomi,T.Kayama, “Theoretical Analysis of Thermal Conductivity of Graphite-containing Reftractory Brick”, Journal of the Technical Associaton of Refractories, Japan”, 31(3), 156-163(2011).

S10’(RJ9’) 平田好洋、松永直樹、吉富丈記、加山恒夫、“グラフアイト含有耐火れんがの熱伝導度の理論的解析”、耐火物、65(5),205-212 (2013).

S11(RJ10) H.Shirasaka, T.Kisanuki, Y.Hirata, N.Matsunaga, S.Sameshima, “Synthesis of Gadolinium-doped Ceria Nanoparticles by Electrolysis of Aqueous Solutions”, Journal of Ceramic Processing Research, in press, 2013.

S12(RJ11) T.Sameshima, Y.Hirata, N.Matsunaga, S.Sameshima, “Factors Affecting Formation of Ceria Nanoparticles by Alternating Current Electrolysis of Aqueous Solutions”, Materials Chemistry and Physics, 136, 313^316 (2012).

S13(RJ12) R.Dong, M.Fang, Y.Hirata, Z.Chen, C.Jin, “Morphology Modification of TiO₂ Film by Adding Ammonium Nitrate in Precursor Sol”, Thin Solid Films, 522, 254-260 (2012).

S14(RJ13) Y.Hirata, T.Shimonosono, T.Sameshima, S.Sameshima, “Compressive Mechanical Properties of Porous Alumina Powder Compacts”, Cramics International, 40, 2315-2322,(2014).

S15(RJ14) H.Shirasaka, T.Shimonosono, Y.Hirata, S.Sameshima, “Analysisi of Gas Permeability of Porous Alumina Compacts”, Journal of Asian Ceramic Societies, 1, 368-373(2013).

S16(RJ15) H.Maeda, Y.Hirata, S.Sameshima, T.Shimonosono, “Analysis of Gas Permeability for Liquid Phase-sintered Porous SiC Compact”, Journal of Porous Media, 17 705-713 (2014).

S17(RJ16) Y.Hirata, “Theoretical Analyses of Thermal Shock and Thermal Expansion Coefficients of Metals and Ceramics”, Ceramics International, 41, 1145-1153 (2015).

S18(RJ17) T.Shimonosono, S.Ikeyama, Y.Hirata, S.Sameshima, “Compressive Deformation of Liquid Phase-sintered Porous Silicon Carbide Ceramics”, Journal of Asian Ceramic Societies, 2, 422-428 (2014).

S19(RJ18) Y.Hirata, “Representation of Thermal Expansion Coeeficient of Solid Material with Particulate Inclusion”, Ceramics International, 41, 2706-2713 (2015).

S20(RJ19) Y. Hirata, T. Shimonosono, S. Sameshima, H. Tominaga, “Sintering of Alumina Powder Compacts and Their Compressive Mechanical Properties”, Ceramics International, 41, 11449-11455 (2015).

S21(RJ20) Y.Hirata, T.Shimonosono, “Theoretical Prediction of Compressive Strength, Young's Modulus and Strain at Fracture of Sintered Porous Alumina Compacts”, Ceramics International , 42, 3014-3018 (2016).

S22(RJ21) Y.Hirata, H.Shirai, R.Ando, Y.Matsumoto, T.Shimonosono, “Theoretical and Experimental Analyses of Relationship between Processing and Thermal Conductivity of SiC with Oxide Additives”, Ceramics International, 42, 13612-13624 (2016).

S23(RJ22) T.Shimonosono, H.Imada, H.Maeda, Y.Hirata, “Separation of Hydrogen from Carbon Dioxide through Porous Ceramics”, Materials, 9 930(20 pages) (2016).

S24(RJ23) Y.Hirata, H.Fujita, T.Shimonosono, “Copressive Mechanical Properties of Partially Sintered Porous Alumina of Bimodal Particle Size System”, Ceramics International, 43, 1895-1903 (2017).

	RJ	IRP	RP	IP	CP	CR	Total
A	64	1	21	0	4	4	94
B	12	1	2	0	1	1	17
C	80	6	23	9	10	6	134
D	30	0	13	1	3	3	50
E	6	0	2	0	2	14	24
S	23	0	1	0	0	0	24
Total	215	8	62	10	20	28	343

A: 高イオン導電性セラミックスの合成と物性,
B: ムライトの合成と特性,
C: コロイドプロセスによるセラミックスの合成と構造制御, D: 複合材料,
E: 南九州産天然鉱物資源の工業的利用, S: その他
RJ=Refereed Journal, IRP=Invited Refereed Proceedings,
RP=Refereed Proceedings, IP=Invited Proceedings, CP=Contributed Proceedings,
CR=Contributed　Report